High−Density Cartridge Heaters

Downloads Inquiry Form

High density cartridge heaters distinguish themselves by their high compression and therefore especially efficient heat emission. That's why we produce them with a ground surface for a H7 fit. The resistance wire is spooled on a ceramic core as shown on the photograph. Afterwards the space between wire and cartridge sheath is filled with MgO. Finally the cartridge is swaged and thus compressed. Advantage of this construction is the resistance wire's short distance to the sheath, the resulting very good heat emission and the excellent control response.

High-Density Cartridge Heaters [1 / 2]
High-Density Cartridge Heaters
Table for technical data and tolerances
Technical data and tolerances:
Wattage: +5% -10%
Resistance: +10% -5%
Dielectric stregth (voltage applied): 1500 V
Insulation (cold 500 V DC): >10
Leakage current (cold): < 0,5 mA
Max. working temperature allowed on sheath: 750 °C
Length tolerance (min. ± 1 mm): ±2 %
* on request
Ø 25 mm / 1'': Lmin 150 mm, Lmax 1500 mm
Ø 32 mm / 1 ¼'': Lmin 300 mm, Lmax 2000 mm
(No warranty claims can be derived from this table)
Diametre in mm 4 5 6,5
¼''
8 10
3/8''
12,5
½''
16
5/8''
20
¾''
25 *
1'' *
32 *
1 ¼'' *
max Volts
(special voltage on request)
240 240 240 240 240 240 400 400 400 400
max Amps 2 2,5 4 5 8 14 18 22 25 25
  • Standard connection(s) » see type I, type N, type F
  • Standard diametres, length and power » see following tables
  • Options » see chapter Options for Cartridge Heaters
Standard connection(s)
Type I

Standard connection Type I
Standard connection Type I
Electric contact is made "Inside" the cartridge heater
(max. lead length uncoupled 1000 mm up to Ø 8 mm)
Advantage: flexible termination area
Type N

Standard connection Type N
Standard connection Type N
The Normal electric contact is made outside the cartridge heater and is protected by a silicone impregnated fibre glass sleeve
Advantage: cheap production, length of the lead freely selectable
Type F

Standard connection Type F
Ø 3/8''
10 mm
1/2''
12,5 mm
5/8''
16 mm
3/4''
20 mm
T [mm] 5 6 7 8
Anschlussausführung Typ F
Flexible version of the outside contacted "normal" connection type N
Advantage: Connection is protected from bending in a ceramic cap, can be manufactured of stock cartridge heaters, length of the lead freely selectable

Standard leads:

  • 250 mm fibre glass insulated nickel leads (up to 300 °C permanent temperature resistant)
  • for High-Density Cartridge Heaters Ø 4,0 mm PTFE leads (up to 260 °C permanent temperature resistant)
  • (With thermocouple: 1000 mm)
  • (Thermo leads see chapter Options for Cartridge Heaters)
Ø 4,0 mm 5,0 mm 6,5 mm
1/4''
8 mm 10 mm
3/8''
12,5 mm
1/2''
16 mm
5/8''
20 mm
3/4''
Legend
I S S S S O O O O S = Standard
O = Option
N - - - - S S S S
F - - - - O O O O

Standard cartridge heaters (metric)

Ø 4 mm Ø 5 mm Ø 6,5 mm Ø 8 mm Ø 10 mm Ø 12,5 mm Ø 16 mm Ø 20 mm
Ø 4 mm *
Ø

mm
L

mm
W

230 V
W/cm² TC
* The cartridge heaters are to be considered as special for the pricing.
4,0 *

-0,02

-0,04
30 50 20 -
75 30 -
35 60 19 -
90 29 -
40 70 19 -
105 28 -
45 80 18 -
120 27 -
50 90 18 -
135 27 -
55 100 18 -
150 27 -
60 110 18 -
165 26 -
70 130 17 -
195 26 -
80 150 17 -
225 26 -
Ø 5 mm *
Ø

mm
L

mm
W

230 V
W/cm² TC
* The cartridge heaters are to be considered as special for the pricing.
5,0 *

-0,02

-0,04
30 100 42 x
125 53 x
40 100 26 x
160 41 x
50 100 18 x
160 29 x
60 125 18 x
200 28 x
80 125 12 x
200 20 x
100 160 12 x
250 19 x
130 200 11 x
315 18 x
Ø 6,5 mm
Ø

mm
L

mm
W

230 V
W/cm² TC
stock cartridge heater
6,5

-0,02

-0,04
40 80 15 -
100 18 -
125 22 x
160 28 x
200 36 x
50 125 16 x
160 21 x
200 26 x
250 32 -
315 42 -
60 125 13 -
160 17 x
200 21 x
250 26 x
315 33 -
80 160 12 -
200 15 x
250 19 x
315 24 x
100 200 12 -
250 15 x
315 18 x
400 24 x
130 250 11 -
315 13 x
400 17 x
500 22 x
160 250 9 -
315 11 x
400 14 x
500 18 x
Ø 8 mm
Ø

mm
L

mm
W

230 V
W/cm² TC
stock cartridge heater
8

-0,03

-0,05
40 125 18 -
160 23 x
200 30 x
50 125 14 -
160 18 x
200 22 -
250 28 x
60 160 14 -
200 17 x
250 22 -
315 27 x
80 200 12 -
250 15 x
315 19 x
400 24 x
100 200 9 -
250 12 x
315 14 -
400 18 x
130 250 9 -
315 11 x
400 14 -
500 18 x
160 250 7 -
315 9 x
400 11 -
500 14 x
Ø 10 mm
Ø

mm
L

mm
W

230 V
W/cm² TC
stock cartridge heater
10

-0,03

-0,06
40 125 16 -
160 20 x
200 25 x
250 32 x
315 39 -
50 160 15 -
200 18 x
250 23 x
315 28 x
400 36 -
500 46 -
60 160 12 -
200 15 x
250 18 x
315 23 x
400 30 -
500 37 -
80 200 10 -
250 13 x
315 16 x
400 20 x
500 26 -
630 32 -
100 250 10 -
315 12 x
400 16 x
500 20 x
630 25 -
800 31 -
130 250 7 -
315 9 x
400 12 x
500 14 x
630 18 -
800 23 -
160 315 7 -
400 9 x
500 11 x
630 14 x
800 18 -
1000 22 -
200 400 7 -
500 9 x
630 11 -
800 14 x
1000 18 -
Ø 12,5 mm
Ø

mm
L

mm
W

230 V
W/cm² TC
stock cartridge heater
12,5

-0,04

-0,07
40 160 16 -
200 20 x
250 25 x
315 32 -
50 160 11 -
200 14 x
250 18 -
315 22 x
400 28 x
60 200 11 -
250 14 x
315 18 -
400 22 x
500 28 -
80 200 8 -
250 10 x
315 13 -
400 16 x
500 20 -
630 25 -
100 315 10 -
400 12 x
500 15 -
630 19 x
800 24 -
1000 30 -
130 315 7 -
400 9 x
500 11 -
630 14 x
800 18 -
1000 22 -
160 400 7 -
500 9 x
630 11 -
800 14 x
1000 18 -
1250 22 -
200 500 7 -
630 9 x
800 11 -
1000 14 x
1250 17 -
1600 22 -
250 630 7 -
800 9 x
1000 11 -
1250 13 x
1600 18 -
2000 22 -
300 630 6 -
800 7 -
1000 9 x
1250 11 -
1600 15 x
2000 18 -
Ø 16 mm
Ø

mm
L

mm
W

230 V
W/cm² TC
stock cartridge heater
16

-0,05

-0,08
50 200 12 -
250 15 -
315 19 -
400 24 -
60 200 9 -
250 11 -
315 14 -
400 18 -
500 22 -
80 250 8 -
315 10 -
400 13 -
500 16 -
630 20 -
800 26 -
100 315 8 -
400 10 -
500 12 -
630 15 -
800 20 -
1000 24 -
130 400 7 -
500 9 -
630 11 -
800 14 -
1000 18 -
1250 22 -
160 500 7 -
630 9 -
800 11 -
1000 14 -
1250 18 -
1600 22 -
200 630 7 -
800 9 -
1000 11 -
1250 14 -
1600 18 -
2000 22 -
250 630 5 -
800 7 -
1000 9 -
1250 11 -
1600 14 -
2000 18 -
300 800 6 -
1000 7 -
1250 9 -
1600 11 -
2000 14 -
2500 18 -
350 800 5 -
1000 6 -
1250 8 -
1600 10 -
2000 12 -
2500 16 -
400 800 4 -
1000 5 -
1250 6 -
1600 8 -
2000 10 -
2500 13 -
Ø 20 mm
Ø

mm
L

mm
W

230 V
W/cm² TC
20

-0,06

-0,10
80 400 11 -
500 14 -
630 17 -
100 400 8 -
500 10 -
630 13 -
130 500 7 -
630 9 -
800 12 -
1000 15 -
160 630 7 -
800 9 -
1000 11 -
1250 14 -
200 800 7 -
1000 9 -
1250 11 -
1600 14 -
250 1000 7 -
1250 9 -
1600 11 -
2000 14 -
300 1000 6 -
1250 7 -
1600 9 -
2000 11 -
350 1250 6 -
1600 8 -
2000 10 -
2500 12 -
400 1250 5 -
1600 7 -
2000 9 -
2500 11 -
450 1600 6 -
2000 7 -
2500 9 -
3200 12 -
500 1600 5 -
2000 6 -
2500 8 -
3200 11 -

Standard cartridge heaters (inch)

Ø 1/4'' Ø 3/8'' Ø 1/2'' Ø 5/8'' Ø 3/4''
Ø 1/4''
Ø

mm
L

mm
W

230 V
W/cm² TC
1/4''

6,35 mm

-0,02

-0,04
1''

25,4 mm
100 38 -
160 53 x
1''1/4

31,8 mm
100 25 -
125 31 x
160 40 x
200 50 x
1''1/2

38,1 mm
80 15 -
100 18 -
125 23 x
160 29 x
200 36 x
2''

50,8 mm
125 17 -
160 21 x
200 27 x
250 33 x
315 42 -
2''1/2

63,5 mm
125 13 -
160 16 -
200 20 x
250 25 x
315 32 x
3

76,2 mm
160 13 -
200 16 x
250 20 x
315 25 x
3''1/2

88,9 mm
160 11 -
200 13 x
250 17 x
315 21 x
4''

101,6 mm
200 11 -
250 14 x
315 18 x
400 23 x
5''

127 mm
250 11 -
315 14 x
400 18 x
500 23 x
6''

152,4 mm
250 9 -
315 12 x
400 15 x
500 18 x
Ø 3/8''
Ø L W

230 V
W/cm² TC
3/8''

9,52 mm

-0,03

-0,06
1''

25,4 mm
125 28 -
200 44 x
1''1/4

31,8 mm
125 21 -
200 33 x
1''1/2

38,1 mm
125 17 -
160 21 x
200 27 x
250 33 x
315 42 -
1''3/4

44,5 mm
125 13 x
160 17 x
200 21 x
250 26 x
315 33 x
2''

50,8 mm
160 15 -
200 19 x
250 24 x
315 30 x
400 38 -
2''1/2

63,5 mm
160 11 -
200 14 x
250 17 x
315 22 x
400 28 x
500 34 -
3''

76,2 mm
200 11 -
250 14 x
315 18 x
400 22 x
500 28 x
630 45 -
3''1/2

88,9 mm
200 9 -
250 11 x
315 14 x
400 18 x
500 23 x
630 29 -
4''

101,6 mm
250 10 -
315 12 x
400 16 x
500 20 x
630 25 -
800 32 -
5''

127 mm
250 7 -
315 9 -
400 12 x
500 15 x
630 18 -
800 24 -
6''

152,4 mm
315 8 -
400 10 x
500 12 x
630 15 x
800 20 -
1000 24 -
7''

177,8 mm
400 8 -
500 10 x
630 13 -
800 16 x
1000 21 -
8''

203,2 mm
400 7 -
500 9 x
630 11 -
800 18 x
1000 23 -
Ø 1/2''
Ø L W

230 V
W/cm² TC
1/2''

12,7 mm

-0,04

-0,07
1''1/2

38,1 mm
160 18 -
200 22 x
250 28 x
315 35 -
2''

50,8 mm
160 11 -
200 14 x
250 18 -
315 22 x
400 28 -
2''1/2

63,5 mm
200 10 -
250 13 x
315 16 -
400 20 x
500 26 -
3''

76,2 mm
250 10 x
315 13 -
400 16 x
500 20 -
630 26 -
800 33 -
3''1/2

88,9 mm
250 9 -
315 11 x
400 14 x
500 18 x
630 22 -
800 28 -
4''

101,6 mm
315 9 -
400 12 x
500 15 x
630 18 x
800 24 -
1000 36 -
5''

127 mm
315 7 -
400 9 x
500 11 -
630 14 x
800 18 x
1000 23 -
6''

152,4 mm
400 7 -
500 9 x
630 12 -
800 15 x
1000 18 -
1250 23 -
7''

177,8 mm
400 6 -
500 8 x
630 10 -
800 12 x
1000 16 -
8''

203,2 mm
500 7 -
630 8 x
800 11 -
1000 14 x
1250 17 -
1600 22 -
9''

228,6 mm
500 6 -
630 8 x
800 10 -
1000 12 x
1250 15 -
1600 19 -
10''

254 mm
630 7 -
800 9 x
1000 11 -
1250 13 x
1600 17 x
2000 21 -
12''

304,8 mm
630 6 -
800 7 -
1000 9 x
1250 11 -
1600 14 x
2000 18 -
Ø 5/8''
Ø L W

230 V
W/cm² TC
5/8''

15,87 mm

-0,05

-0,08
2''

50,8 mm
200 11 -
250 14 -
315 18 -
400 23 -
2''1/2

63,5 mm
200 8 -
250 10 -
315 13 -
400 16 -
500 20 -
3''

76,2 mm
250 8 -
315 11 -
400 13 -
500 17 -
630 21 -
800 26 -
4''

101,6 mm
315 8 -
400 10 -
500 12 -
630 15 -
800 20 -
1000 24 -
5''

127 mm
400 7 -
500 8 -
630 10 -
800 14 -
1000 17 -
1250 21 -
6''

152,4 mm
500 7 -
630 9 -
800 12 -
1000 15 -
1250 19 -
1600 24 -
7''

177,8 mm
500 6 -
630 8 -
800 10 -
1000 13 -
1250 16 -
1600 20 -
8''

203,2 mm
630 7 -
800 9 -
1000 11 -
1250 14 -
1600 18 -
2000 22 -
10''

254 mm
630 5 -
800 7 -
1000 9 -
1250 11 -
1600 14 -
2000 17 -
12''

304,8 mm
800 6 -
1000 7 -
1250 9 -
1600 11 -
2000 14 -
2500 17 -
14''

355,6 mm
800 5 -
1000 6 -
1250 7 -
1600 9 -
2000 12 -
2500 15 -
16''

406,4 mm
1000 5 -
1250 6 -
1600 8 -
2000 10 -
2500 12 -
Ø 3/4''
Ø L W

230 V
W/cm² TC
3/4''

19,05 mm

-0,06

-0,10
3''

76,2 mm
400 11 -
500 14 -
630 18 -
4''

101,6 mm
400 8 -
500 10 -
630 13 -
5''

127 mm
500 7 -
630 9 -
800 11 -
1000 14 -
6''

152,4 mm
630 8 -
800 10 -
1000 13 -
1250 16 -
8''

203,2 mm
800 7 -
1000 9 -
1250 11 -
1600 15 -
10''

254 mm
1000 7 -
1250 9 -
1600 11 -
2000 14 -
12''

304,8 mm
1000 6 -
1250 7 -
1600 9 -
2000 12 -
14''

355,6 mm
1250 6 -
1600 8 -
2000 10 -
2500 13 -
16''

406,4 mm
1250 5 -
1600 7 -
2000 9 -
2500 11 -
18''

457,2 mm
1600 6 -
2000 8 -
2500 10 -
3200 12 -
20''

508 mm
1600 6 -
2000 7 -
2500 9 -
3200 11 -

Also available special diametres (on request):

  • Ø 5,9 / 6 / 6,4 / 12 / 14 / 15 / 18 / 25 / 25,4 / 31,8 mm
  • square: 4,5 x 4,5 / 6 x 6 / 8 x 8 / 6 x 12 / 10 x 10 mm (see chapter Square Cartridge Heaters)


Downloads:

You may find this interesting as well:

upward