Cookies make our website more user-friendly and effective. By using our website, you confirm that you agree to the use of cookies.

OK learn more

Service (User Manual)Downloads

Service

Because oft he hygroscopic characteristic of the used ceramic insulation materials they absorb moisture.When stored unprotected in environmental air it is absolutely important to check the insulation resistance before use and – if necessary – to dry the elements (controlled start-up or drying oven).

Our heating elements are designed for being operated at defined voltages. Operation at higher voltages may reduce lifetime considerably or result in immediate failure (15% more voltage = 32% more power!).

A too slag fit obstructs the heat conduction and leads to heat accumulation that could overheat and eventually destroy the heater.

The termination area must be protected from lubricants, detergents and solvents as these could diffuse into the tubular heater and lead to short circuits.

For flexible tubular heaters: elements which are bent once, should not be altered anymore. The connection area as well as the first 5 mm must not be deformed at all.

Surface density must be chosen in relation to the material to be heated. If the surface density is too high, the material to be heated could be destroyed.

When used in aggressive media, please pay attention to using of correspondigly resistant material of the tubular heater.

In every practice application there are working and environmental parameters which cannot be calculated exactly in theory. That is why we recommed generally to test our heating elements in the application under real working conditions before series use.

No warranty claims can be derived from these user instructions.



Downloads:

  • Chapter Tubular Heaters
    Chapter Tubular Heaters

    Many sections, many lengths: Long-living heating elements for the use in air or tools. We can supply many different shapes, lengths and wattages with the option to be bent by yourselves.

  • Flyer Tubular Heaters 3 x 3 mm / Ø 3,3 mm
    Flyer Tubular Heaters 3 x 3 mm / Ø 3,3 mm

    Download our leaflet to our tubular heaters with the dimensions 3 x 3 mm / Ø 3,3 mm


You may find this interesting as well:

Needing help?

In case of any queries our team will be happy to assist you!


Direct line

Tel.: +49 2373 9590 0

Fax: +49 2373 9590 30

E-Mail:


Contact Form

open Contact Form

You would like to contact us or submit an inquiry? Please complete the form below and send it to us.


Callback Form

open Callback Form

You need detailed information and competent advice? Please fill in all mandatory fields so that you can be contacted by the right person.


upward