Choose from our Thermocouples (TC) and Resistance Sensors (RS) between these products:
- Bayonet Thermocouples/ Resistance Sensors
- Angle Thermocouples/ Resistance Sensors
- Stick Thermocouples/ Resistance Sensors
- Jam or Clamp-band Thermocouples/ Resistance Sensors
- Air Thermocouples/ Resistance Sensors
- Bendable Thermocouples/ Resistance Sensors
- Bayonet caps and screw-in nipples
Bayonet Thermocouples/ Resistance Sensors
TEB-VS2
- Thermocouple: Fe-CuNi DIN IEC 584 (J) / Fe-CuNi DIN 43710 (L) / NiCr-Ni DIN IEC 584 (K)
- Sensor point: Ø 8 mm
- Built-in depth: about 15 up to about 150 mm
- Screw-in nipple: MS 58 nickled
- Bayonet cap: MS 58 nickled
- Working temperature: max. 400 °C
- Thermo leads: 2 x 0,35 mm²
- Measure position: soldered: 118 ° drill angle
- Compression spring: V2A
Angle Thermocouples/ Resistance Sensors
TEWS-P12
- Thermocouple: J; L; K
- Sensor point: Ø 8 mm
- Built-in depth: to 40 mm
- Working temperature: max. 400 °C
- Thermo lead: 2 x 0,35 mm²
- Protection spring: V2A
- Measure position: soldered / plane
TEWS-H4
- Thermocouple: J; L; K
- Sensor point: Ø 5 mm
- Built-in depth: (A) to » 300 mm (specification)
- (B) 40 to» 300 mm (specification)
- Working temperature: max. 400 °C
- Thermo lead: 2 x 0,35 mm²
- Protection spring: -
- Measure position: soldered / hemisherical
TEWS-H17
- Thermocouple: J; L; K
- Sensor point: Ø 4 mm
- Built-in depth: 12 mm (specification)
- Working temperature: max. 400 °C
- Thermo lead: 2 x 0,35 mm²
- Protection spring: -
- Measure position: soldered / hemispherical
TEW-NH3
- Thermocouple: J; L; K
- Sensor point: Ø 6 mm
- Built-in depth: ca. 7 - 9 mm (incl. thread)
- Screw-in nipple: MS 58 nickled
- Bayonet cap: MS 58 nickled
- Working temperature: max. 400 °C
- Thermo lead: 2 x 0,35 mm²
- Measure position: soldered / hemispherical
Regards: is there´s no other information Leads surrounded with fibre glass and specially impregnated. Execution with braided metal sleeve.
Other executions on request.
Stick Thermocouples/ Resistance Sensors
TES-P16
- Thermocouple: J; L; K
- Sensor point: Ø 6 mm
- Built-in depth: L = 20 - 300 mm (specification)
- Working temperature: max. 400 °C
- Thermo lead: 2 x 0,35 mm²
- Measure position: soldered / plane
TES-P34
- Thermocouple: J; K; L
- Sensor point: Ø 3,5 mm
- Material: 1.4301
- Built-in depth: L = 30 mm or as specified
- Protection spring: fibre glass-silicone sleeve
- Working temperature: max. 400 °C
- Thermo lead: 2 x 0,5 mm²
- Measure position: soldered / plane
TES-LP34
- Thermocouple: J; K; L
- Sensor point: Ø 3,5 mm
- Material: 1.4301
- Built-in depth: L = 30 mm or as specified
- Protection spring: fibre glass silicone sleeve
- Working temperature: max. 400 °C
- Thermo lead: 2 x 0,5 mm²
- Measure position: soldered / plane
- Fixing link: 15 x 8 mm
Leads insulated with fibre glass and specially impregnated.
Jam or Clamp-band Thermocouples/ Resistance Sensors
TELK-O
- Thermocouple: J; K; L
- Dimensions: dimension D and B on request
- Working temperature: max. 400 °C
- Thermo lead: 2 x 0,35 mm²
- Measure position: soldered
Up to width 37 mm connection at the edge (drawing) more than 38 mm connection in the middle.
TERT-O
- Thermocouple: J; K; L
- Working temperature: max. 400 °C
- Thermo lead: 2 x 0,35 mm²
- Measure position: soldered
Air Thermocouples/ Resistance Sensors
TEL-N7
- Thermocouple: J; K; L
- Sensor point: D = 8 mm, 24 drill holes each D = 3 mm
- Built-in depth: 75 mm
- Screw-in nipple: MS 58 nickled
- Working temperature: max. 400 °C
- Thermo lead: 2 x 0,35 mm²
- Measure position: open
Bendable Thermocouples/ Resistance Sensors
- Type: J (Fe-CuNi) / K (NiCr-Ni)
- Sheath diametre: 1,0 / 1,5 / 2,0 / 3,0 mm
- Steath length: as required
- Min. bending radius: fourfold sheath diametre
- Sheath material: 1.4301 / 1.4401 / 2.4816
- Insulation resistance: >200 MΩ (at Ø 1 mm >100MΩ)
- Testing voltage: 250V
Measurement range | |||
---|---|---|---|
Type | 1.4301 / AISI304 | 1.4401 / AISI316 | 2.4816 / Inconnel 600 |
J (Fe-CuNi) | -40 bis 450 °C | -40 bis 750 °C | not possible |
K (NiCr-Ni) | -40 bis 450 °C | -40 bis 750 °C | -40 bis 900 °C |
Transition head stainless steel
- Max. temperature: 400 °C
- Dimension: 4 x 30 mm
- Water resistant: no
Transition head moulded
- Max. temperature: 400 °C
- Dimension: 5,5 x 20 mm
- Water resistant: yes
Bayonet caps and screw-in nipples
thread | length | wrench size | |
---|---|---|---|
Type 1 | M14 x 1,5 | 30 mm | SW 17 |
M12 x 1 | 30 mm | SW 17 | |
M12 x 1 | 60 mm | SW 17 | |
M12 | 30 mm | SW 17 | |
G3/8" | 30 mm | SW 17 | |
G1/4" | 30 mm | SW 17 | |
Type 2 | M14 x 1,5 | 40 mm | - |
M14 x 1,5 | 50 mm | - | |
M14 x 1,5 | 60 mm | - | |
M14 x 1,5 | 80 mm | - | |
M14 x 1,5 | 90 mm | - | |
M12 x 1 | 25 mm | - | |
M12 x 1 | 40 mm | - | |
M12 x 1 | 50 mm | - | |
M12 x 1 | 60 mm | - | |
M12 x 1 | 40 mm | - | |
Type 3 | M 14 x 1,5 | 30 mm | SW 17 |
M12 x 1 | 30 mm | SW 17 | |
M12 | 30 mm | SW 17 | |
M10 | 30 mm | SW 14 | |
M10 x 1 | 30 mm | SW 14 | |
G3/8" | 30 mm | SW 17 | |
G1/4" | 30 mm | SW 17 | |
Type 4 | M14 | 34 mm | - |
M12 x 1 | 22 mm | - | |
M12 x 1 | 50 mm | - | |
M12 x 1 | 100 mm | - | |
M12 | 22 mm | - | |
M12 | 40 mm | - | |
M12 | 60 mm | - | |
M8 x 0,75 | 43 mm | - |
More executions without illustration
- Bayonet cap "m" inside diametre 10,5 mm
- Bayonet cap "g" inside diametre 16,8 mm
- Bayonet cap "gs" inside diametre 15,5 mm mit with pins, pin distance 13,2 mm
Leads surrounded with fibre glass and specially impregnated. Execution with braided metal sleeve. Other executions on customer's request. Please pay attention to general built-in and starting instructions (order if the occasion arises).
Téléchargements:
-
Sheath thermocouples for the plastics industry with cast connection head
Sheath thermocouples with Kapton connector cable and a cast connection head capable of withstanding high temperatures: an "Xtreme" version designed for the most demanding conditions in temperature measurement for nozzles and hot runner systems.
-
Really hot! Our Product Flyer.
Download our leaflet here.