Termopares (TC) y Sensores de Resistencia (RS)

Homepage Products Thermo Sensors  Termopares (TC) y Sensores de Resistencia (RS)

Choose from our Thermocouples (TC) and Resistance Sensors (RS) between these products:

• Bayonet Thermocouples/ Resistance Sensors
• Angle Thermocouples/ Resistance Sensors
• Stick Thermocouples/ Resistance Sensors
• Jam or Clamp-band Thermocouples/ Resistance Sensors
• Air Thermocouples/ Resistance Sensors
• Bendable Thermocouples/ Resistance Sensors
• Bayonet caps and screw-in nipples

---

Bayonet Thermocouples/ Resistance Sensors

TEB-VS2

• Thermocouple: Fe-CuNi DIN IEC 584 (J) / Fe-CuNi DIN 43710 (L) / NiCr-Ni DIN IEC 584 (K)
• Sensor point: Ø 8 mm
• Built-in depth: about 15 up to about 150 mm
• Screw-in nipple: MS 58 nickled
• Bayonet cap: MS 58 nickled
• Working temperature: max. 400 °C
• Thermo leads: 2 x 0,35 mm²
• Measure position: soldered: 118 ° drill angle
• Compression spring: V2A

TEB-VP2 same as TEB-VS2
but measure position
Ø 8 mm / plane

TEB-VP3 same as TEB-VS2
but measure position
with ceramic insulation; plane

TEB-VH3 same as TEB-VS2
but measure position
with ceramic insulation; hemispherical

---

Angle Thermocouples/ Resistance Sensors

TEWS-P12

• Thermocouple: J; L; K
• Sensor point: Ø 8 mm
• Built-in depth: to 40 mm
• Working temperature: max. 400 °C
• Thermo lead: 2 x 0,35 mm²
• Protection spring: V2A
• Measure position: soldered / plane

---

TEWS-H4

• Thermocouple: J; L; K
• Sensor point: Ø 5 mm
• Built-in depth: (A) to » 300 mm (specification)
• (B) 40 to» 300 mm (specification)
• Working temperature: max. 400 °C
• Thermo lead: 2 x 0,35 mm²
• Protection spring: -
• Measure position: soldered / hemisherical

---

TEWS-H17

• Thermocouple: J; L; K
• Sensor point: Ø 4 mm
• Built-in depth: 12 mm (specification)
• Working temperature: max. 400 °C
• Thermo lead: 2 x 0,35 mm²
• Protection spring: -
• Measure position: soldered / hemispherical

---

TEW-NH3

• Thermocouple: J; L; K
• Sensor point: Ø 6 mm
• Built-in depth: ca. 7 - 9 mm (incl. thread)
• Screw-in nipple: MS 58 nickled
• Bayonet cap: MS 58 nickled
• Working temperature: max. 400 °C
• Thermo lead: 2 x 0,35 mm²
• Measure position: soldered / hemispherical

Regards: is there´s no other information Leads surrounded with fibre glass and specially impregnated. Execution with braided metal sleeve.

Other executions on request.

---

Stick Thermocouples/ Resistance Sensors

TES-P16

• Thermocouple: J; L; K
• Sensor point: Ø 6 mm
• Built-in depth: L = 20 - 300 mm (specification)
• Working temperature: max. 400 °C
• Thermo lead: 2 x 0,35 mm²
• Measure position: soldered / plane

---

TES-P34

• Thermocouple: J; K; L
• Sensor point: Ø 3,5 mm
• Material: 1.4301
• Built-in depth: L = 30 mm or as specified
• Protection spring: fibre glass-silicone sleeve
• Working temperature: max. 400 °C
• Thermo lead: 2 x 0,5 mm²
• Measure position: soldered / plane

---

TES-LP34

• Thermocouple: J; K; L
• Sensor point: Ø 3,5 mm
• Material: 1.4301
• Built-in depth: L = 30 mm or as specified
• Protection spring: fibre glass silicone sleeve
• Working temperature: max. 400 °C
• Thermo lead: 2 x 0,5 mm²
• Measure position: soldered / plane
• Fixing link: 15 x 8 mm

Leads insulated with fibre glass and specially impregnated.

---

Jam or Clamp-band Thermocouples/ Resistance Sensors

TELK-O

• Thermocouple: J; K; L
• Dimensions: dimension D and B on request
• Working temperature: max. 400 °C
• Thermo lead: 2 x 0,35 mm²
• Measure position: soldered

Up to width 37 mm connection at the edge (drawing) more than 38 mm connection in the middle.

---

TERT-O

• Thermocouple: J; K; L
• Working temperature: max. 400 °C
• Thermo lead: 2 x 0,35 mm²
• Measure position: soldered

---

Air Thermocouples/ Resistance Sensors

TEL-N7

• Thermocouple: J; K; L
• Sensor point: D = 8 mm, 24 drill holes each D = 3 mm
• Built-in depth: 75 mm
• Screw-in nipple: MS 58 nickled
• Working temperature: max. 400 °C
• Thermo lead: 2 x 0,35 mm²
• Measure position: open

---

Bendable Thermocouples/ Resistance Sensors

• Type: J (Fe-CuNi) / K (NiCr-Ni)
• Sheath diametre: 1,0 / 1,5 / 2,0 / 3,0 mm
• Steath length: as required
• Min. bending radius: fourfold sheath diametre
• Sheath material: 1.4301 / 1.4401 / 2.4816
• Insulation resistance: >200 MΩ (at Ø 1 mm >100MΩ)
• Testing voltage: 250V

Measurement range
Type	1.4301 / AISI304	1.4401 / AISI316	2.4816 / Inconnel 600
J (Fe-CuNi)	-40 bis 450 °C	-40 bis 750 °C	not possible
K (NiCr-Ni)	-40 bis 450 °C	-40 bis 750 °C	-40 bis 900 °C

---

Transition head stainless steel

• Max. temperature: 400 °C
• Dimension: 4 x 30 mm
• Water resistant: no

---

Transition head moulded

• Max. temperature: 400 °C
• Dimension: 5,5 x 20 mm
• Water resistant: yes

---

Bayonet caps and screw-in nipples

	thread	length	wrench size
Type 1	M14 x 1,5	30 mm	SW 17
	M12 x 1	30 mm	SW 17
	M12 x 1	60 mm	SW 17
	M12	30 mm	SW 17
	G3/8"	30 mm	SW 17
	G1/4"	30 mm	SW 17
Type 2	M14 x 1,5	40 mm	-
	M14 x 1,5	50 mm	-
	M14 x 1,5	60 mm	-
	M14 x 1,5	80 mm	-
	M14 x 1,5	90 mm	-
	M12 x 1	25 mm	-
	M12 x 1	40 mm	-
	M12 x 1	50 mm	-
	M12 x 1	60 mm	-
	M12 x 1	40 mm	-
Type 3	M 14 x 1,5	30 mm	SW 17
	M12 x 1	30 mm	SW 17
	M12	30 mm	SW 17
	M10	30 mm	SW 14
	M10 x 1	30 mm	SW 14
	G3/8"	30 mm	SW 17
	G1/4"	30 mm	SW 17
Type 4	M14	34 mm	-
	M12 x 1	22 mm	-
	M12 x 1	50 mm	-
	M12 x 1	100 mm	-
	M12	22 mm	-
	M12	40 mm	-
	M12	60 mm	-
	M8 x 0,75	43 mm	-

More executions without illustration

• Bayonet cap "m" inside diametre 10,5 mm
• Bayonet cap "g" inside diametre 16,8 mm
• Bayonet cap "gs" inside diametre 15,5 mm mit with pins, pin distance 13,2 mm

Leads surrounded with fibre glass and specially impregnated. Execution with braided metal sleeve. Other executions on customer's request. Please pay attention to general built-in and starting instructions (order if the occasion arises).



---