Resistencias Planas (más de 200°C)

Downloads Inquiry Forms

As flexible and variable as our silicone heating mats, kapton (polyimide) heating foils and polyester heating elements are, so fixed is their maximum temperature application limit of 200°C. Above this threshold, surface heating elements are insulated either with mica insulating material (mikanite and phlogopit) or with ceramics. In order to give these naturally brittle materials a certain degree of dimensional flexibility, they are framed in metal if required or manufactured as segment radiators. Standardized heating bands can also be used for cylindrical components such as pipes, plasticizing units or injection moulding nozzles.

Alternatively, heating plates and hot surfaces can also be equipped close to the contour with

With correspondingly tight-meshed assembly or laying, quite homogeneous temperature profiles can also be achieved in the surface, and this for operating temperatures up to 750°C.

The following selection table gives you an initial overview of which basic surface heating types are eligible for your application.

Micanite Flat Heating Elements - framed in metal with pressure plate and connection housing [1 / 6] Ceramic Insulated (Band) Heaters [4 / 6]
Selection table for Flat Heating Elements (over 200°C) and Flexible Heaters (up to 200°C)
  Flat Heating Elements
(over 200°C)
Flexible Heaters
(up to 200°C)
  Micanite Phlogopit Silicone Kapton Polyester
  Wire Wound Etched Foil
* higher surface loads can be achieved, depending on the application, with very good heat consumption and fast control
(No warranty claims can be derived from this table)
Continuous temperature resistance 350 °C 450 °C -60 °C - 200 °C -60 °C - 200 °C -269 °C - 200 °C -30 °C - 90 °C
Continuous temperature resistance with self adhesive foil - - -60 °C - 180 °C -60 °C - 180 °C -60 °C - 180 °C -30 °C - 90 °C
Short term temperature resistance 700 °C 900 °C 250 °C 200 °C 200 °C 100 °C
Recommended max. watt density* 4,0 W/cm² 5,0 W/cm² 0,8 W/cm² 0,8 W/cm² 0,8 W/cm² 0,2 W/cm²
Power tolerance +5 / -10% +5 / -10% +5 / -10% +5 / -10% +5 / -10% +/-10%
max. dimension 2000 x 1000 mm 2000 x 1000 mm 940 x 3000 mm 595 x 2500 mm 285 x 550 mm 1000 x 600 mm
min. dimension 30 x 30 mm 30 x 30 mm 30 x 30 mm 20 x 20 mm 25 x 25 mm 25 x 25 mm
min. height 2,0 mm
(metal p.:
4,0 mm)
2,0 mm
(metal p.:
4,0 mm)
1,1 - 3,0 mm 0,8 - 1,5 mm 0,2 mm 0,2 mm
Dimension tolerance +/- 1 mm +/- 1 mm +/- 1 mm +/- 1 mm +/- 1 mm +/- 1 mm
Quantities from 1 piece from 1 piece from 1 piece from 1 piece from 1 piece from 25 pieces
min. bend radius - - 5 mm 5 mm 2 mm 5 mm
max. IP-protection - - IP65 IP65 IP64 IP64
Adhesive foil possible no no yes yes yes yes
UL possible no no yes yes no yes

Resistencias de superficie de micanita

MICANITE is a kind of insulation paper which is impregnated with a heat resistant binder and afterwards pressed in several shifts under heat and high pressure to plates. This material is heat resistant up to 350 °C, as special construction (Phlogopit) up to 450 °C, and is used for the wire wound formers as well as for the encapsulating cover plates...

learn more

Bandas calefactoras de cerámica

Ceramic surface heating elements are predestined for high-temperature applications beyond 450 °C, for example for pipe heating in process heat technology, especially when gases are involved. Ceramic insulated flat heating elements are also brought into action where a heat storage capacity is needed, as in hot plates the case...

learn more

Servicio (Manual de usuario)

Here you can see the user manual for our flat heating elements...

learn more


  • Chapter Flat Heating Elements
    Chapter Flat Heating Elements

    Multifunctional use, uniform heating: Contact heating of flat surfaces. We manufacture flat heating elements in several materials, customised to your application.